Features and Uses

* Enter the 5 to 96 channels, RTD, thermocouple, current, voltage input

* The basic error of ± 0.2% F · S, display range -1999 to 9999, measuring speed 0.2 seconds per channel

* Set independently for each channel signal type, range, alarm values

* The calibration function for each channel independently, effectively reducing sensor errors, improve the system of measurement, control accuracy

* Can not use any off the channel, the channel is closed after the alarm is no longer displayed, printed

* Two arguments, the first two configuration parameters are password controlled with parameter copy function can be quickly set parameters, greatly reducing the workload parameter settings

* Unique practical alarm function

Each channel can be set two alarm by the alarm mode selection for the upper or lower limit, to achieve, and on the upper, upper, lower, lower, lower limit function. Independent alarm sensitivity setting.

2:00 Common relay output, two kinds of relay mode can be set

* Multi-point alarm control unit can be used XSLCU

* Each channel independent alarm indicator is not lit, flashing, bright three states, do not light indicates that no alarm, blinking into the alarm, press the mute button turned bright

* Computer via the communication interface specified in a read one or several channels or all channels of data, greatly reduce the communication time

* Input circuit with protection, improve reliability and anti-jamming capability * Dual measured value display, especially for temperature and humidity measurement

* -55 ℃ ~ +125 ℃ XSZ application may be considered optional temperature display and control instrument

Multi-point communication alarm · · print records, large-screen display

Technical Specifications

Suitable for multi-point measurement, alarm, acquisition and recording