Products
CFBHX-Ⅰ cantilever sensors
Author:Anonymous Update:2013-7-11 Hits:0
Features and Uses
The sensor is used to cut or bend elastomeric cantilever structure, one end fixed, one end of the force, low height profile, high structural strength, can be used for a variety of tension or compression load and measurements. With: dust seal, wide range, high precision, stable and reliable performance, easy installation and so on.
For electronic scales, scales and other measuring, weighing measurement and control systems for industrial automation.
Dimensions
| Range | A | B | C | D | W | H | M | 2-Ф | I |
| 50kg ~ 2t | 130 | 12 | 26 | 76 | 32 | 32 | M12 × 1.75 | Ф13 | 55 |
| 2.5t ~ 5t | 171.5 | 19.1 | 38.1 | 95.3 | 38.1 | 38.1 | M18 × 1.5 | Ф19.5 | 76 |
| 6t ~ 10t | 225.6 | 25.4 | 50.8 | 122.9 | 50.8 | 50.8 | M30 × 2 | Ф26.4 | 105 |
Technical Specifications
| Parameters | Units | Technical parameters | Parameters | Units | Technical parameters |
| Sensitivity | mV / V | 2.0 ± 0.05 | Temperature coefficient of sensitivity | ≤% F · S/10 ℃ | ± 0.03 |
| Nonlinear | ≤% F · S | ± 0.03 | Operating temperature range | ℃ | -20 ℃ ~ +80 ℃ |
| Hysteresis | ≤% F · S | ± 0.03 | Input resistance | Ω | 350 ± 20Ω |
| Repeatability | ≤% F · S | ± 0.02 | Output Resistance | Ω | 350 ± 5Ω |
| Creep | ≤% F · S/30min | ± 0.03 | Safe overload | ≤% F · S | 150% F · S |
| Zero output | ≤% F · S | ± 1 | Insulation resistance | MΩ | ≥ 5000MΩ (50VDC) |
| Zero temperature coefficient | ≤% F · S/10 ℃ | ± 0.03 | Recommended excitation voltage | V | 10V ~ 15V |