Products
CFBPG high temperature pressure transmitter
Features and Uses
The sensor is made of imported high-precision, high stability pressure sensor core body temperature transmitter through internal capillary impulse delivered to the rear diaphragm, drum on the transmitter plus a plurality of fins, greatly improving the transmission The thermal performance, measured medium temperature up to 150 ℃. This product uses the stainless steel structure, with anti-corrosion, put radio frequency interference, lightning, high accuracy, high stability, high reliability, intrinsically safe explosion-proof characteristics. Widely used in metallurgy, thermal engineering, defense, scientific research, oil exploration and other departments of the hydraulic and starting equipment, industrial process measurement and control.
Dimensions
| Parameters | Units | Technical parameters | Parameters | Units | Technical parameters | |
| Measurement Media | 316 stainless steel is compatible with a variety of liquids, gases or vapors. | Measuring range | -0.1KPa ~ 0 ~ 0.01KPa ~ 100MPa | |||
| Overload | 1.5 times full scale pressure or 110MPa (the minimum value) | Pressure type | Gauge pressure, absolute pressure, sealed reference pressure | |||
| Power supply | 15 ~ 30VDC | 15 ~ 25VDC | 15 ~ 28VDC | |||
| Output Signal | 4 ~ 20mADC | 0 ~ 10/20mADC | 0/1 ~ 5/10vdc | |||
| Transmission | Wire | Three-wire | Three-wire | |||
| Accuracy | Typical: ± 0.25% F · S | Maximum: ± 0.25% F · S | ||||
| Including non-linearity, hysteresis and repeatability | ||||||
| Long-term stability | Typical: ± 0.1% F · S | Maximum: ± 0.2% F · S | ||||
| Zero temperature coefficient | 0.03% F · S / ℃ (≤ 100KPa) | 0.02% F · S / ℃ (> 100KPa) | ||||
| 0.03% F · S / ℃ (≤ 100KPa) | 0.02% F · S / ℃ (> 100KPa) | |||||
| Operating Temperature | -30 ~ 150 ℃ | Storage temperature | -40 ~ 200 ℃ | |||
| Load resistance | ≤ (U-15) / 0.2Ω | Electrical connection | Cable, aviation plug, plug Hochman | |||
| Shell material | Stainless steel 1Cr18Ni9Ti | Process interface | M12 × 1; M20 × 1.5 or G1 / 4 outer thread | |||
| Protection class | IP65 | Explosion-proof mark | Exia Ⅱ CT6 (Intrinsically safe) |
|||