Products
CFDN intelligent torque meter
Technical Specifications
1, the basic technical specifications
|
K-type Small Desktop Size
|
216 × 90 × 280 |
|
Instrument Power
|
220VAC |
|
Display Range
|
Torque Display: -19999 to 19999, decimal point position can be set |
| Speed display: -1999 to 4500, decimal point position can be set | |
| Power display: 0 ~ 9999, the decimal point automatically adjust | |
|
Pulse input signal
|
Various NPN, PNP, OC gate output proximity switches, rotary encoders |
|
Counting frequency |
Speed pulse input 2Hz ~ 1.5KHz |
|
Torque pulse input 5KHz ~ 15KHz |
2 Options Technical Specifications
Alarm Output
Two kinds of alarm mode, by setting options. Alarm delay function
Relay output: contact capacity 220V AC, 3A
Transmitter output
Optical isolation
4mA ~ 20mA, 0mA ~ 10mA, 0mA ~ 20mA DC current output, by setting options. Load capacity is greater than 600Ω
1V ~ 5V, 0V ~ 5V DC voltage output is required when ordering
Output Resolution: 1/4000, the error is less than ± 0.2% FS
Communication Interface
Optical isolation
RS232, RS485 standard, specify when ordering
Instrument address can be set from 0 to 99
Communication rate 2400, 4800, 9600, 19200 by setting options, the rate is lower than 2400 require when ordering
Print interface and printing unit
Built-in hardware clock, power does not affect the travel time, automatically adjust the leap year, big, Satsuki
Manual, manual + time, manual + time + alarm three print mode selected by setting
Print Content: Time (year, month, day, hour, minute), torque, speed values, power, peak, units
One printing unit can only access a single instrument
External power supply
± 15V